Journal of Dental Sciences
Volume 5, Issue 2 , Pages 90-99 , June 2010

Multifactorial analysis of variables influencing the fracture strength of repair joints for provisional restorative materials using the statistically based Taguchi method

  • Chun-Jen Cheng

      Affiliations

    • Department of Prosthodontics, Dental Section, Lin-Kou Medical Center, Chang Gung Memorial Hospital, Linkou, Taoyuan, Taiwan
    • Graduate Institute of Craniofacial and Dental Science, Chang Gung University, Taoyuan, Taiwan
    • ,
  • Chun-Li Lin

      Affiliations

    • Department of Mechanical Engineering, Graduate Institute of Medical Mechatronics, Chang Gung University, Taoyuan, Taiwan
    • ,
  • Yu-Fu Shan

      Affiliations

    • Department of Prosthodontics, Dental Section, Lin-Kou Medical Center, Chang Gung Memorial Hospital, Linkou, Taoyuan, Taiwan
    • Corresponding Author InformationCorresponding author. Department of Prosthodontics, Dental Section, Lin-Kou Medical Center, Chang Gung Memorial Hospital, 5 Fu-Shing Street, Kwei-Shan, Taoyuan 33305, Taiwan

Received 13 February 2010 ,Accepted 10 May 2010.

References 

  1. Rosenstiel SF , Land MF , Fujimoto J . In: Contemporary Fixed Prosthodontics . 4th ed.. Missouri: Mosby; 2006;p. 466–504
  2. Haselton DR , Diaz-Arnold AM , Vargas MA . Flexural strength of provisional crown and fixed partial denture resins . J Prosthet Dent . 2002;87:225–228
  3. Burns DR , Beck DA , Nelson SK , Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics  . A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics . J Prosthet Dent . 2003;90:474–497
  4. Christensen GJ . Provisional restorations for fixed prostho-dontics . J Am Dent Assoc . 1996;127:249–251
  5. Duke ES . Provisional restorative materials: a technology update . Compend Contin Educ Dent . 1999;20:497–500
  6. Shillingburg HT , Hobo S , Whitsett LD , Jacobi R , Brackett SE . In: Fundamentals of Fixed Prosthodontics . 3rd ed.. Chicago: Quintessence; 1997;p. 225–256
  7. Nagai E , Otani K , Satoh Y , Suzuki S . Repair of denture base resin using woven metal and glass fiber: effect of methylene chloride pretreatment . J Prosthet Dent . 2001;85:496–500
  8. Hazelton LR , Nicholls JI , Brudvik JS , Daly CH . Influence of reinforcement design on the loss of marginal seal of provisional fixed partial dentures . Int J Prosthodont . 1995;8:572–579
  9. Anusavice KJ . In: Phillips' Science of Dental Materials . 10th ed.. Philadelphia: WB Saunders; 1996;p. 285–431
  10. Young HM , Smith CT , Morton D . Comparative in vitro evaluation of two provisional restorative materials . J Prosthet Dent . 2001;85:129–132
  11. Tjan AH , Castelnuovo J , Shiotsu G . Marginal fidelity of crowns fabricated from six proprietary provisional materials . J Prosthet Dent . 1997;77:482–485
  12. Wang RL , Moore BK , Goodacre CJ , Swartz ML , Andres CJ . A comparison of resins for fabricating provisional fixed restorations . Int J Prosthodont . 1989;2:173–184
  13. Koumjian JH , Nimmo A . Evaluation of fracture resistance of resins used for provisional restorations . J Prosthet Dent . 1990;64:654–657
  14. Robinson FB , Hovijitra S . Marginal fit of direct temporary crowns . J Prosthet Dent . 1982;47:390–392
  15. Monday JJ , Blais D . Marginal adaptation of provisional acrylic resin crowns . J Prosthet Dent . 1985;54:194–197
  16. Palomo F , Peden J . Periodontal considerations of restorative procedures . J Prosthet Dent . 1976;36:387–394
  17. Grajower R , Shaharbani S , Kaufman E . Temperature rise in pulp chamber during fabrication of temporary self-curing resin crowns . J Prosthet Dent . 1979;41:535–540
  18. Crispin BJ , Watson JF , Caputo AA . The marginal accuracy of treatment restorations: a comparative analysis . J Prosthet Dent . 1980;44:283–290
  19. Ireland MF , Dixon DL , Breeding LC , Ramp MH . In vitro mechanical property comparison of four resins used for fabrication of provisional fixed restorations . J Prosthet Dent . 1998;80:158–162
  20. Osman YI , Owen CP . Flexural strength of provisional restorative materials . J Prosthet Dent . 1993;70:94–96
  21. Gegauff AG , Pryor HG . Fracture toughness of provisional resins for fixed prosthodontics . J Prosthet Dent . 1987;58:23–29
  22. Diaz-Arnold AM , Dunne JT , Jones AH . Micro-hardness of provisional fixed prosthodontic materials . J Prosthet Dent . 1999;82:525–528
  23. O'Brien WJ . In: Dental Materials and Their Selection . 3rd ed.. Canada: Quintessence; 2002;p. 339–390
  24. Vahidi F . The provisional restoration . Dent Clin North Am . 1987;31:363–381
  25. Wood M , Halpern BG , Lamb MF . Visible light-cured composite resins: an alternative for anterior provisional restorations . J Prosthet Dent . 1984;51:192–194
  26. Solow RA . Composite veneered acrylic resin provisional restorations for complete veneer crowns . J Prosthet Dent . 1999;82:515–517
  27. Bohnenkamp DM , Garcia LT . Repair of bis-acryl provisional restorations using flowable composite resin . J Prosthet Dent . 2004;92:500–502
  28. Beyli MS , von Fraunhofer JA . Repair of fractured acrylic resin . J Prosthet Dent . 1980;44:497–503
  29. Harrison WM , Stansbury BE . The effect of joint surface contours on the transverse strength of repaired acrylic resin . J Prosthet Dent . 1970;23:464–474
  30. Ward JE , Moon PC , Levine RA , Behrendt CL . Effect of repaired surface design, repair material, and processing method on the transverse strength of repaired acrylic denture resin . J Prosthet Dent . 1992;67:815–820
  31. Amin AE . The effect of poly-aramide fiber reinforcement on the transverse strength of a provisional crown and bridge resin . Egypt Dent J . 1995;41:1299–1304
  32. Larson WR , Dixon DL , Aquilino SA , Clancy JM . The effect of carbon graphite fiber reinforcement on the strength of provisional crown and fixed partial denture resins . J Prosthet Dent . 1991;66:816–820
  33. Geerts Greta AVM , Overturf JH , Oberholzer TG . The effect of different reinforcements on the fracture toughness of materials for interim restorations . J Prosthet Dent . 2008;99:461–467
  34. Mullarky RH . Aramid fiber reinforcement of acrylic appliances . J Clin Orthod . 1985;19:655–658
  35. Pfeiffer P , Grube L . In vitro resistance of reinforced interim fixed partial dentures . J Prosthet Dent . 2003;89:170–174
  36. Samadzadeh A , Kugel G , Hurley E , Aboushala A . Fracture strengths of provisional restorations reinforced with plasma-treated woven polyethylene fiber . J Prosthet Dent . 1997;78:447–450
  37. El-Ebrashi MK . Experimental stress analysis of dental restorations, VII: structure design and stress analysis of fixed partial dentures . J Prosthet Dent . 1970;23:177–186
  38. Raigrodski AJ . Contemporary all-ceramic fixed partial dentures: a review . Dent Clin North Am . 2004;48:531–544
  39. Miller LL . Framework design in ceramo-metal restorations . Dent Clin North Am . 1977;21:699–716
  40. Mclean JW . Bridge design and laboratory procedures in dental ceramics . In: The Science and Art of Dental Ceramics . Volume 2: Chicago: Quintessence; 1982;
  41. Sorensen JA , Curz M , Mito WT , Raffeiner O , Meredith HR , Foser HP . A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic . Pract Periodent Aesthet Dent . 1998;11:95–106
  42. Raigrodski AJ , Salzer AM . Clinical considerations in case selection for all-ceramic fixed partial dentures . Pract Proced Aesthet Dent . 2002;14:411–419
  43. Mclaren EA , White SN . Glass-infiltrated zirconia/alumina-based ceramic for crowns and fixed partial dentures: clinical and laboratory guidelines . Quintessence Dent Technol . 2000;23:63–76
  44. Dar FH , Meakin JR , Aspden RM . Statistical methods in finite element analysis . J Biomech . 2002;35:1155–1161
  45. Lee WCC , Zhang M . Design of monolimb using finite element modeling and statistics-based Taguchi method . Clin Biomech (Bristol, Avon) . 2005;20:759–766
  46. Phadke MS . Quality Engineering Using Robust Design . New Jersey: Prentice Hall; 1989;
  47. Lin CL , Chang SH , Chang WJ , Kuo YC . Factorial analysis of variables influencing mechanical characteristics of a single tooth implant placed in the maxilla using finite element analysis and the statistics-based Taguchi method . Eur J Oral Sci . 2007;115:408–416
  48. Wei YH , Lai CC , Chang JS . Using Taguchi experimental design methods to optimize trace element composition for enhanced surfactin production by Bacillus subtilis ATCC 21332 . Process Biochem . 2007;42:40–45
  49. Jeney C , Dobay O , Lengyel A , Adam E , Nasz I . Taguchi optimization of ELISA procedures . J Immunol Methods . 1999;223:137–146
  50. Protemp 3 Garant temporization material technical product profile, 3M ESPE, Germany . Available at: http://www.3m.com/intl/kr/medi/medi5/pdf/protemp3garant.pdf

PII: S1991-7902(10)60013-X

doi: 10.1016/S1991-7902(10)60013-X

Journal of Dental Sciences
Volume 5, Issue 2 , Pages 90-99 , June 2010

Article Tools